Unrecognized Causes And Solutions For 3D Printing Supplies

信息来源于:互联网 发布于:2021-08-24

Inkjet Printer To Use A Long Time, There Will Be A Printer Can Not Identify The Problem Of Printing Supplies, This Situation Do Not Panic, Mainly Due To The Following Two Reasons:
1, The Printer Waste Ink Tank Full
Each Inkjet Printer Has A Fixed Accessory Life Setting, When Some Accessories To Reach The Service Life, The Printer Will Be Prompted To Print. As A Result Of The Continuous Use Of Ink System Is Easy To Cause Waste Ink, It Is Easy To Lead To Waste Ink Full. This Can Be Done In Two Ways: Use The Clear Software To Print The Motherboard To Clear The Reset, In Order To Eliminate The Printer Settings; Or You Can Go To The Maintenance Point To Replace The Sponge In The Waste Ink Warehouse. It Is Advisable For The User To Use The Latter Because Simply Clearing The Stack Easily Causes The Waste Ink To Burn The Printer.
2,3D Printing Supplies To Identify The Chip Is Poor Or The Printer Can Not Identify The Chip
This Situation Does Not Have Much To Do With The System And Printer Driver Settings. If You Use A Compatible 3D Printing Supplies Or Chip Decoder To Decode The Original 3D Printing Supplies, Because Some Compatible Consumables Manufacturers Produced By The Chip Quality Is Not Stable Or Decoding Prone To Errors, So Often Lead To The Printer Can Not Identify The 3D Print Supplies. If You Are Using The Original 3D Printing Supplies, Please Check The 3D Printing Supplies Chip And Printer Contact Point Between The Existence Of Oxidation Or Contamination Of Impurities Such As Ink, With Alcohol After Cleaning Can Generally Return To Normal. If The Printer Is Used For A Long Time, There May Be Contact Points Broken, Loss Of Flexibility And Other Issues, Encountered This Situation, Can Only Move The Printer To The Replacement Of Electric Shock Parts.
The Above Is The Inkjet Printer 3D Printing Supplies Can Not Identify The Solution, Hoping To Help Everyone.