XYD-Flex
XinYuDa(XYD) Plastic Products Factory
XYD-Flex

XYD-Flex consumable is thermoplastic and elastic rubber wire rod, it will become soften under a certain temperature and remains the same at room temperature. Its range of hardness is large , by changing the ratio of each reaction component, you will get products of different hardness, and the products still keep good elasticity and wear resistance under increasing hardness. The carrying capacity, impact resistance and vibration reducing performance of its products are prominent because of its high mechanical strength. Its low temperature resistance is very good, the temperature it needs to transform into glassy state is low and it still remains good elasticity, flexibility and other physical performances such as oil resistance, water resistance and bacteria resistance even under 35 degrees below zero. XYD-Flex consumable is a environmental protection material of renewable utilization and has got related certification from the Organization Of International Green Environmental Protection Material.

XYD-Flex Print Finished
XinYuDa(XYD) Plastic Products Factory
打印效果
耗材产品参数
XinYuDa(XYD) Plastic Products Factory
  • Printing temperature
    240℃-255℃
  • Product Features
    柔软耐磨
  • Specification
    1.75/3.0mm,±0.05
  • Packing
    1Kg / volume, 10 rolls / box

  • 0.7Kg / volume, 10 rolls / box

  • 0.5Kg / roll, 10 rolls / box
Product color
XinYuDa(XYD) Plastic Products Factory

  • 1.75mm White - vertical

  • 1.75mm Black - vertical

  • 1.75mm Transparent - vertical

  • 1.75mm Deep skin color - vertical
Print supplies properties
XinYuDa(XYD) Plastic Products Factory
Physical properties of materials Testing standards ABS Flame retardant ABS HIPS FLEX MAX WOOD Bamboo PLA WOOD Bamboo PLA
Specific Gravity D792 1.05 1.17 1.05 1.2 1.27 1.05~1.18 1.0~1.18 1.24 1.05~1.18 1.0~1.18 1.24
Heat change temperature H.D.T
Annealed(85℃,8hr) Unannedaled
1/4",120℃、hr 99(210)
88(190)
85(185)
76(169)
90 / 70(0.455Mpa(66psi) 65 65 60 65 65 60
MFR(200°C,g/10min) 200℃,5kg 1.8 4.8 8 12.1 20(250℃2.16KG) 8~18 8~18 5~12 8~18 8~18 5~12
Bending strength (MPa)Tensile Strength@Break,psi ASTM D790 820(11660) 640(kg/c㎡) D638/450 / Mpa(kgf/cm2)71(720) 5500 5500 7770 5500 5500 7770
Tensile Elongation,% ASTM D638 20 15 40 >400 4.5 5.5 5 6 5.5 5 6
Notched lzod lmpact,ft-lb/in(J/m) ASTM D256 18(3.3)
20(3.7)
3.8 11 85 85 0.06 0.06 0.1(16) 0.06 0.06 0.1(16)
Printing temperature 220℃-260℃ 220℃-260℃ 210℃-260℃ 195℃-245℃ 230℃-260℃ 190℃-230℃ 190℃-230℃ 190℃-230℃ 190℃-230℃ 190℃-230℃ 190℃-230℃